3.46 [87.9] sq. may be added to this surface custom mtg. hole config. typical end view allow for free air flow around fins to assure units must be mounted in such a way as to performance xt100w-xxy model number: how to order: dc - 1.5 ghz, 1 db; tnc - male/fem model number: model number: dc - 2.5 ghz, 3 db; tnc - fem/fem dc - 6 ghz, 20 db; tnc - female/male connector configuration 2t100w-3f 6t100w-20fm ordering examples: model number: 1t100w-1 freq. range 1 = dc - 1.5 ghz 6=dc-6ghz 2 = dc - 2.5 ghz (male input) (female input) db value m = male/male f = fem/fem fm = female/male = male/female note: units are unidirectional, therefore input connector must be specified & will be indicated on unit 2x ?1.98 [50.3] 4.965 .025 [126.11 0.64] 6.53 .05 [165.9 1.3] pictured length: 6.43 .05 [163.3 1.3] male/male connectors female/female connectors length: 6.62 .05 [168.1 1.3] model number: model number: xt100w-xxm xt100w-xxf male/female connectors length: 6.53 .05 [165.9 1.3] model number: xt100w-xx 4.125 [104.8] 2x 8-32unc-2b tap x .50 [12.7] dp. .23 [5.8] 1.75 [44.5] 2x m4x0.7 tap x .50 [12.7] dp. input aeroflex / inmet, inc. 300 dino drive, ann arbor, mi 48103 ? u.s.a. 888-244-6638 or 734-426-5553 fax: 734-426-5557 www.aeroflex-inmet.com ? sales@aeroflex-inmet.com ? ? specifications: models: xt100w-xx, xt100w-xxf, xt100w-xxm xt100w-att: rev n gold plated beryllium copper -55c to +125c anodized aluminum passivated stainless steel 50 ohms 1 kw max. 100 watts avg. dc - 6.0 ghz operating temp range housing tnc connectors conductors peak power input power impedance frequency range 20 watts max. reverse power standard db values 3, 6, 10, 20, 30 & 40 db standard freq. values 1.5, 2.5 ,&6ghz dc - 1.5 ghz vswr (max.) attenuation accuracy 10 - 40 db 1-6db 1.20:1 0.75 db 0.50 db 2.5 - 6 ghz 0.75 db 1.5 db 1.30:1 1.0 db 0.50 db 1.5 - 2.5 ghz 1.40:1 mechanical: electrical: mates with mil-std-348 derated linearly to 20 watts @ +125 c o (5usec pulse, .05% duty cycle) attenuators tnc up to 6 ghz, 100 watts note: dimensions in brackets are expressed in millimeters and are for reference only. design, specifications are subject to change without notice. contact factory for technical specifications before purchasing or use.
|